Testo 310 Flue Gas Analyser is robust, easy to use and provides accurate results. Ideal for checking heating systems. A printer is also included so you can print the measurement data on the spot.
Testo 310 Flue Gas Analyser:
- Performs gas analysis, CO and differential pressure monitoring
- With a bright display for easy measurements even in poorly lit areas
- Has a built-in magnet to attach the device to any metal object
- Includes a sensor that can be set to 0 within 30 seconds
- Conveniently and quickly replaceable filter
TECHNICAL SPECIFICATION:
Temperature – TC Type K (NiCr-Ni) (ambient)
Measurement range: -20 °C to +100 °C
Accuracy: ±1 °C
Resolution: 0.1 °C
Response time: < 50 s
Temperature – TC Type J (Fe-CuNi) (combustion gas)
Measuring range: 0 °C to +400 °C
Accuracy: ±1 °C (0 °C to +100 °C); ±1.5 % (> 100 °C)
Resolution: 0.1 °C
Response time: < 50 s
O2
Measuring range: 0 Vol.% to 21 Vol.%
Accuracy: ±0.2 Vol.%
Resolution: 0.1 Vol.%
Response time: 30 s
Efficiency of combustion gases (ETA)
Measuring range: 0 % to 120 %
Resolution: 0.1 %
Loss of combustion gases (calculated)
Measurement range: 0 % to 99.9 %
Resolution: 0.1 %
CO2 (calculated from O2)
Measurement limits: 0 to CO₂ maximum limit
Accuracy: ±0.2 Vol.%
Resolution: 0.1 Vol.%
Response time: < 40 s
Pressure measurement
Measurement range: -40 hPa to +40 hPa
Accuracy: ±0.5 hPa
Resolution: 0.1 hPa
CO (without H₂ offset)
Measuring range: 0 ppm to 4000 ppm
Accuracy: ±20 ppm (0 ppm to 400 ppm); ±5 % (401 ppm to 2000 ppm); ±10 % (2001 ppm to 4000 ppm)
Resolution: 1 ppm
Response time: 60 s
Environmental CO
Measuring range: 0 ppm to 4000 ppm
Accuracy: ±20 ppm (0 ppm to 400 ppm); ±5 % (401 ppm to 2000 ppm); ±10 % (2001 ppm to 4000 ppm)
Resolution: 1 ppm
Response time: 60 s
General parameters
Size: 201 x 83 x 44 mm
Operating temperature: -5 °C to +45 °C
Display: LCD, backlit
Battery: 1500 mAh
Storage temperature: -20 °C to +50 °C
Weight: approx. 700 g with sensor
DELIVERY SCOPE: Testo 310 Flue Gas Analyser, IR printer with rechargeable batteries, O2, CO, hPa and temperature calibration certificates, 18 cm sensor with cone, silicone tubes for pressure measurement, 5 filters and carrying case, 2 extra paper rolls for the printer.
PRODUCT CODE: 0563 3110
